Impact of Dynamic Interlayer Interactions on Thermal Conductivity of Ca3Co4O9

The phonon thermal conductivity of misfit-layered Ca₃Co₄O₉ has been calculated by perturbed molecular dynamics using a classical force field. Detailed numerical analyses reveal that, in spite of its smaller cross-sectional area, the CoO₂ layer transports more heat than the thicker rock salt (RS) layer, although its local thermal conduction is more suppressed than in another layered cobaltite, Na _x CoO₂. The origins of these differences have been elucidated through careful examination of the atomic arrangements in each layer. Since thermal conduction in the RS layer can be reduced without deteriorating electronic properties for which the CoO₂ layer is responsible, it is suggested that the RS layer should be modified to further suppress the overall in-plane thermal conductivity. Computational experiments with increasing number of Ca–O planes in the RS layer showed the opposite trend to what can be predicted based on the misfit between two dissimilar layers. Further analyses to reveal the origin of these unexpected results provide yet another strategy to further decrease the thermal conductivity, namely to control the dynamic interference between atoms across the interface between two layers.     

Effect of Vacuum Heat Treatment on Electron-Beam-Irradiation-Cured Polycarbosilane Fibers

Electron-beam-cured polycarbosilane fibers were heat-treated at 673–1773 K in a tube evacuated to 1.3 × 10⁻¹ Pa and then exposed at 1873 K in argon. The effect of vacuum heat treatment on improving the high-temperature stability of low-oxygen SiC fibers was investigated by examining gas evolution, grain growth, surface composition, tensile strength, and morphology. The fibers heat-treated at <1173 K lost strength, because of the vigorous generation of residual hydrogen. A minute amount of oxygen in the atmosphere caused the active oxidation of SiC during heat treatment at >1673 K, resulting in severe strength degradation for the as-heat-treated fibers. Vacuum heat treatment at 1573 K provided the best characteristics in low-oxygen SiC fibers.     

Challenges Upon Reactive Plasma Spray Nitriding: Al Powders and Fabrication of AlN Coatings as a Case Study

Reactive plasma spraying (RPS) is a promising technology for the in situ formation of several ceramic coatings. The focus of this paper is to summarize the state of our current knowledge about the RPS process and using the nitriding of Al particles and the fabrication of aluminum nitride coatings, as a case study. The aspects and challenges in this process such as the influence of the plasma power, in-flight time, particle size, nitriding mechanism, splat morphology, in-flight particle diagnostics, N₂ plasma gas, and the feeding rate on the RPS process are analyzed and discussed.     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

Efficient synthesis and magnetic properties of triphenylamine bearing three nitronylnitroxide radicals

Improved synthesis and reinvestigation of the magnetic properties of triphenylamine bearing three nitronylnitroxide radicals (1) were carried out. Single crystal X-ray crystallographic analysis of 1 established that its molecular shape had a C₃-symmetry. Our newly prepared 1 showed different physical properties from those of reported. SQUID measurements of 1 showed that each of the three spins of 1 behaved independently at room temperature. In contrast, the three spins coupled antiferromagnetically at lower temperature as low as ca. 1.8 K. These spin behaviors can be explained by a regular triangular antiferromagnetic model (J/k_B = ?3.3 K) and interpreted as a spin frustration system.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

The flow rate of test odor spouting into the mask in the dynamic odor test

The adoption of the sensory odor test will prevail widely in many local self governments in Japan in order to evaluate and regulate the complex odor in fields. This is also done by the tri‐angle choice bag test. However, this procedure has several problems in the reliability and reproducibility of the results obtained. It is desired to solve these problems by the mechanization of the method. From this point of view, an experimental study on the flow rate of test odor has been carried out and the results obtained are described in this paper. It is confirmed that the optimum flow rate of test odor is about 41/min at the inlet of the mask in the dynamic sniffing method.     

Design and manufacturing of JT-60SA vacuum vessel

JT-60 is planned to be upgraded to JT-60SA tokamak machine with fully superconducting coils, which is a project of the JA-EU satellite tokamak program under both Broader Approach program and Japanese domestic program. The JT-60SA vacuum vessel (VV) has a D-shape poloidal cross section and a toroidal configuration with 10° facet segmented in toroidal direction. The material of the VV is 316L stainless steel with low cobalt content of <0.05 wt%. A double wall structure is adopted for the VV to ensure high rigidity and high toroidal one-turn resistance simultaneously.Fundamental welding R&D and a trial manufacturing of the 20° upper half of the VV have been performed to study the manufacturing procedure. After the confirmation of the quality of the mock-up, manufacturing of the actual VV started in November 2009.     

Microstructure of a Molybdenum Nitride Layer Formed by Nitriding Molybdenum Metal

For pure molybdenum nitrided at 1373 K in NH₃ gas, microstructural observations of a molybdenum nitride layer were conducted through a transmission electron microscope. The molybdenum nitride layer consisted of two molybdenum nitrides: an outer one of γ-Mo₂N and an inner one of β-Mo₂N. A great number of (011)[0     1] type twins were observed in the β-Mo₂N phase, whereas the microstructure of the γ-Mo₂N phase was almost free from lattice defects except for slightly observed {111}〈112〉 type twin.     

Wireless Body Area Network Combined with Satellite Communication for Remote Medical and Healthcare Applications

Wireless Body Area Network (WBAN) is expected to play an important role in supporting medical and healthcare services with increased convenience and comfort. One main advantage of WBAN is that it enables automatic biosignal collection in real time which is essential in medical treatment and healthcare vigilance. To harmonize with the strong demands from both medical and healthcare societies, and information and communications technology industries, IEEE 802 Standard Committee set up a task group of TG15.6 to develop an IEEE wireless standard on WBAN. In this paper, we first review the main activities of TG15.6 with the updated status. Then, we present a prototype WBAN system that is implemented by using ultra-wideband technology. Multi-hop mechanism is adopted to guarantee reliable connection. Finally, we describe an experimental system that uses the developed WBAN system by combining with satellite communication in supporting remote medical treatment and healthcare. In case of less of medical resources such as in emergency, in rural or isolated areas, such a system is important in sending the corresponding biosignal to a remote hospital in real time to help patient management. The relative delay of WBAN data delivery via satellite is measured which is dependent on the satellite link capacity.